arduino nano in case
  • Photo_3
  • Photo_4-2
  • Photo_1-2
  • Photo_2
  • Photo_2
  • Photo_4
  • Arduino_nano_enclosure
  • Arduino_nano_enclosure_lid
  • Arduino_nano_enclosure_top
  • Arduino_nano_enclosure_bottom

No reviews have yet been written for this product.

Write your own review

3D Printed Arduino Nano Enclosure - Create This

This is an Arduino Nano Case. Arduino Nanos are tiny! They have pins sticking up on both sides. To make matters worse, the mounting holes on the corners of the board are tiny and delicate. This makes mounting an Arduino Nano a challenge, unless you have a 3d Printed Arduino Nano Enclosure from Create This!

We custom designed this mounting system in OpenSCAD, just for the Arduino Nano.

All of the pins are accessible through the case, even the ICSP header on the bottom of the board.

The lid is removable WITHOUT disconnecting pins. If the ICSP header is unused, the entire Arduino Nano is removable without disconnecting pins.

The screw holes thread easily with a #6-32 screw. Try an M3 or M3.5 in metric.

Outer dimensions:

  • 1 5/16" or 33.25mm width
  • 2" or 51mm length
  • 9/16" or 14.3mm height

This is a 3d Printed part in PLA. We 3d print it and ship it to you. No 3d printer required.

Have a 3d printer and just want to download the STL files or SCAD files? Click here for the digital version.

Need to use this with a Pololu MD01B motor controller? Click here for the combined Arduino Nano and MD01B Mounting Plate.
Look for similar items